Retail is moving from the 1D barcode to 2D codes, and the carrier is a trim: the care label, the hang tag and the poly bag sticker. GS1's Sunrise 2027 initiative, together with deadlines already published by retailers in the US and Europe, means a label approved this season may have to carry a QR code containing a GS1 Digital Link by the next. This guide covers what changes on the label, which print methods can hold the code, and the numbers to settle with the buying team now.
1. What actually changes: from a 13-digit line to a link
One sentence covers the difference: a 1D EAN-13 carries the GTIN and nothing else, while a 2D code carries the same GTIN plus lot, serial and a resolvable URL of the form https://id.gs1.org/01/{GTIN}/10/{lot}/21/{serial}. At the till that URL resolves to price and product data; after the sale it is the only practical route back to the batch whose care labels bled in the wash. For a trims supplier this is concrete: the carrier, the size and the acceptance grade of the code now belong in the specification, not just as a black square on the artwork.
2. Three numbers decide the layout: module, quiet zone, label width
GS1 works from the X-dimension, the width of one module. Retail POS scanning is normally specified at 0,4 to 0,5 mm per module; a logistics-only code can go thinner, around 0,25 mm. A Digital Link carrying lot and serial typically needs 29 to 33 modules, so at 0,5 mm the symbol alone is roughly 15 to 17 mm square, and a QR code needs a four-module quiet zone on all sides (a DataMatrix needs one) — about 19 to 21 mm before any text fits beside it. On a folded care label that is the difference between a 20 mm and a 30 mm label.
3. Which carrier and print method can hold it
| Carrier and print | Practical minimum module | Verdict |
|---|---|---|
| Thermal transfer care label, 300 dpi | 0,25 mm | Default: stable heat and tension gives repeatable codes |
| Offset hang tag with matte lamination | 0,30 mm | Workable: matte kills glare, avoid gloss |
| Woven label | 0,60 mm or more | Often unreliable: fuzz blurs modules; print instead |
| Thermal transfer sticker on poly bag | 0,30 mm | Workable: skip direct thermal, it fades |
4. Contrast and verification: where lots fail
The code needs black on white and nothing touching it. Foil, hot stamping and gloss lamination over the code hand readability to luck. Verification follows ISO/IEC 15415, graded A to F; retail usually accepts C (1,5) and prefers B (2,5) or better. What matters is testing five to ten codes per lot and keeping the reports, because a passing proof never proves a passing production run — thermal transfer drifts with head temperature and ribbon batch, often three thousand metres in.
- Gloss lamination or foil over the code: the scanner simply cannot read it
- Quiet zone trimmed away, or text and creasing pressed beside it
- Woven fuzz or under-heated transfer blurs the module edges together
5. What the law asks for: traceability, not a slogan
In the EU, Regulation (EU) 2023/988 on general product safety has applied since 13 December 2024 and expects a product to be identifiable and traceable, with a named responsible economic operator. For a trim, a 2D code that resolves to batch data is the cheapest way to satisfy that, because the label is already on the garment. Japan's Household Goods Quality Labelling Act governs composition and care marking, and Korea's Quality Management and Industrial Products Safety Control Act governs quality labelling; both require the printed information itself to be visible — a QR code supplements it, never replaces it. Writing that into the specification saves a whole round of argument later.
6. A pilot checklist before 2027
- Test existing care labels and hang tags on the buyer's scanner, not a phone camera
- Fix module size and quiet zone in the spec, and pass the GTIN prefix to the supplier
- Verify at proof stage to ISO/IEC 15415, asking for B (2,5) or better
- Keep five to ten verified codes per production lot; it is the only evidence you can show later
Related Articles
- Hang tag barcodes: placement, quiet zone and print tolerance
- Barcode verification grades: how to read A to F
- Care label print requirements: resolution, ribbon and contrast
Need samples, barcode verification or origin paperwork?
Request samples and a quote →