The ink decides more of a garment packaging compliance file than the paper does. It carries the heavy metals, it is what migrates into a white shirt in transit, and it is the part of a paper bag that a repulping line has to get rid of. Buyers still choose ink last, usually by asking which one is cheapest. This guide sets out the three systems, the one limit that applies to every one of them, and the points where a cheaper ink costs more later.

Three ink systems and the job each one does

Ink system Where it belongs Migration risk Effect on recycling
Water-based Kraft and uncoated paper bags, corrugated cartons, tissue Low, provided the binder is fully dried Good: repulps with the fibre and deinks easily
Solvent-based PE and PP poly bags, film windows, coated board Medium; residual solvent can transfer in a sealed carton Poor on paper; fine on PE film where the film is already unrecyclable
UV-cured Coated board, hang tags, laminated gift boxes Very low once cured; the risk is under-curing, not the chemistry Bad on paper: the cured film does not repulp

The rule we apply: water-based for anything that will be repulped, UV for coated board that will be laminated or varnished anyway, solvent only where the substrate is plastic film and nothing else dries fast enough. A 30 cm print area on a kraft bag is where the choice matters most, because that is where coverage is highest and repulpability is decided.

The 100 ppm line applies to the printed bag, not to the ink drum

EU packaging law caps the combined content of lead, cadmium, mercury and chromium VI at 100 mg/kg in the finished packaging and in any component, ink included. That limit now sits in the Packaging and Packaging Waste Regulation (PPWR, EU 2025/40), which continues the older Directive 94/62/EC. The same 100 ppm figure appears in the US model legislation adopted by most states through TPCH, which is why one test report usually serves both markets.

Three details decide whether that report is usable: the limit is a sum, not a per-element figure; the sample must be taken from the printed area, not from blank board; and it must name the ink batch. A certificate that says heavy-metal free without a test report is a claim, not a document.

Mineral oil: why a white shirt goes yellow inside a new bag

Recycled fibre often brings mineral oil with it, from newsprint inks in the waste stream. Above roughly 40 °C in a container or truck, mineral oil saturated hydrocarbons move through the board, through the poly bag and into the garment, and they show up as a yellow edge on light-coloured fabric about four weeks later. The fix is not a thicker bag: it is low-migration ink, a mineral-oil-free recycled grade, or an inner barrier film of 30 to 40 microns.

Ink load decides whether the bag is recyclable at all

  • Coverage above roughly 60 % of the sheet is where repulping yield drops and the mill starts rejecting the batch as a deinking problem.
  • A full-bleed dark interior costs nothing to print and everything to recycle: 100 % coverage on the inside face makes the bag a mixed-material item in most sorting lines.
  • Compostable paper must still pass EN 13432, which tests ecotoxicity and heavy metals on the printed article, not on the base paper alone.

How to specify ink on a purchase order

  • Name the chemistry, not the trade name. Water-based, solvent-based or UV-cured, plus the substrate it will sit on.
  • Require the heavy-metal test report per ink batch, with the sample taken from the printed area.
  • Set a coverage ceiling in the artwork file: 60 % for kraft, and no full-bleed dark interior at all.
  • Ask for a migration test only when the packaging will hold light-coloured garments for more than four weeks or cross a tropical route — otherwise the report is money spent for no decision.

What changes market by market

Germany adds the VerpackG registration in LUCID, so the producer of the printed bag needs a registration number before the first delivery, and the ink declaration belongs in the same file as the PPWR heavy-metal report. France requires the Triman mark and the sorting information under décret n° 2022-748, which means the printed layout has to reserve space for a marquage block that did not exist five years ago. Spain ties packaging to Ley 7/2022, and the plastic tax there makes the film layer, not the ink, the larger line item.

In Japan the Container and Packaging Recycling Act drives the identification mark, and the marking is an obligation, not a courtesy, so the plastic mark or paper mark has to be printed in a defined size. The Act on Control of Household Products Containing Harmful Substances also catches inks that carry restricted substances into consumer goods. In Korea, environmental claims on packaging fall under the fair labelling and advertising act: eco-friendly ink wording without substantiation is treated as misleading advertising, not as harmless marketing.

Brazil is where the ink file most often gets thin. The Consumer Defence Code (Lei 8.078/1990) requires clear information in Portuguese on the packaging, plus the importer or responsible party, and ABNT NBR test methods are what a Brazilian customer will ask for when they check a claim. For children's packaging, INMETRO conformity requirements apply on top. A single water-based line with a Portuguese data sheet and a named responsible party clears all of it far more cheaply than reprinting a shipment at destination.

Related reading

Tell us the destination market and what goes inside the bag. We come back with the ink system, the coverage limit and the test documents that market actually asks for — before the artwork is approved, not after.

Ask about ink options