A kraft hang tag looks like the simplest trim there is: unbleached brown board, one hole, hang it. In practice it is the trim where three things go wrong most often. GSM is chosen too low, so the tag curls on the rail within two days. Brand colours are printed straight onto brown stock, and red turns brick while blue turns grey-green. And eco credentials are written as a slogan with nothing behind them, which becomes a liability the moment a marketplace or a customer runs an audit. This guide covers GSM, printing and green claims, then gives the PO fields and the acceptance checks you can measure.

1. GSM and Stiffness: What 300 to 450 g/m² Actually Feels Like

GSM Feel and stiffness Where it works The catch
300 g/m² Soft, bends easily Fast fashion, e-commerce inner tags Curls; reinforce the hole
350 g/m² The default, holds shape Most apparel hang tags Heavy dark ink shows the paper grain
400 g/m² Clearly stiff, has weight Export buyers, department stores, gift-box tags Edges crack on die-cutting; use a fresh die
450 g/m² and up Close to light card, hard Premium main tags, gift-box sets An eyelet is mandatory or the hole tears

Two suppliers can both quote 350 g/m² and still deliver a full grade apart in stiffness, because stiffness depends on three things: pulp (unbleached kraft pulp is stiffer than recycled fibre), calendering, and fibre direction. Writing only GSM on the PO is not enough — name the paper grade too. At goods-in, run an ISO 2493 bending stiffness test and look at the spread across ten consecutive sheets in the same direction; scatter tells you more about batch consistency than any single reading.

2. Printing on Unbleached Stock: Why Colours Drift

Unbleached kraft carries its own yellow-grey cast and sits well below white board in lightness, so ink behaves as if it were read through a sheet of brown glass: a four-colour brand red drifts brick, a brand blue drifts grey-green, and light greys disappear outright. There are three workable answers, and which one you choose depends on how tight the brand is on colour and on budget.

  • White underprint plus CMYK: one or two hits of white to block the base, then process colour. Costs roughly 10–20% more and gets closest to the brand artwork, but a thick white layer cracks along folds.
  • Spot-colour screen printing: one screen per colour, a thick ink film and strong opacity — white and gold on brown are especially reliable. Ideal for one- or two-colour minimal tags; cost climbs fast beyond that.
  • Design with the stock: stop fighting the base and use deep brown, ink black, off-white or metallics so the paper becomes part of the design. Cheapest, most durable look, and the current default for premium lines.
Proofing rule: kraft must be proofed on the same paper batch and judged under a standard light source. Hold brand colours to ΔE ≤ 1.5 and general colours to ΔE ≤ 2.0, and have the supplier keep a retained sheet per batch — kraft base colour alone can vary by around ΔE 1 between lots, so skipping re-approval gives you two colours of the same tag.

3. Green Claims: What You Can and Cannot Print

The hang tag is where green slogans get printed, and it is the first thing an auditor reads. Europe currently looks at two lines: misleading claims (consumer law — in France the Code de la consommation, in Spain Ley 7/2022 and consumer protection rules) and concrete packaging/product duties (Regulation (EU) 2025/40, the PPWR, plus GPSR (EU) 2023/988 on the responsible operator and traceability). The principle is simple: every environmental statement must point back to a certificate, a test report or a number you can calculate.

Claim you want What makes it defensible Wording to avoid
Contains recycled content State the percentage and its basis — supplier declaration plus batch record Just writing eco paper
FSC certified A valid licence code, within the CoC scope, covering this product Borrowing another supplier's FSC mark
Recyclable Name the real collection route — e.g. with cardboard, no plastic film Laminating the whole tag and still claiming 100% recyclable
Biodegradable or compostable A test report and certificate against the relevant standard, with conditions stated Dropping biodegradable on paper without evidence

One more point that gets missed: the mandatory information on the tag needs space of its own. Tags for the EU usually have to carry the importer or responsible operator and the country of origin; consumer information for the French market must appear in French, as the Code de la consommation requires, and Spanish-language markets expect the same treatment. Reserve those fields at the die-line stage on the back, low down — otherwise you discover at pre-press that the front has no room and end up at 6 pt, which nobody can read.

4. Five Fields for the Purchase Order

  • GSM plus paper grade, e.g. 350 g/m² unbleached kraft, virgin pulp, one-side calendered — not simply kraft paper.
  • Base colour reference: supply a paper swatch or an L*a*b* window, with tolerance and a re-approval rule for lot changes.
  • Print method and colour count: white-underprint CMYK, spot screen, or single-colour printing, with the colour reference (Pantone or ΔE target).
  • Surface finish, the field most often omitted: none, aqueous coating, spot UV, foil, lamination — five different feels, five different recyclability stories, five prices.
  • Hole and hardware: diameter, position, whether an eyelet is used, and which cord. Keep the hole at least 8 mm from the edge or the first hard pull tears through.

5. Acceptance: Four Measurable Checks

  • GSM: weigh ten random tags and convert; ±5% is the normal tolerance, and anything beyond it means the paper changed.
  • Stiffness: bend ten consecutive pieces in the same direction and look at the mean and the spread; a spread above 10% means mixed stock.
  • Colour: compare against the approved sample — ΔE ≤ 1.5 for brand colours, ΔE ≤ 2.0 for the rest; run a rub test on heavy dark solids.
  • Curl and moisture: condition at 38 °C / 90% RH for 24 hours and measure edge lift; above 3 mm points to moisture content or insufficient calendering.

Put these four items in the acceptance block of the PO and kraft tags stop being a goods-in judgement call. One cost point that is easy to miss: kraft board prices move less than white board, but a lower unit price is not a lower total — if stiffness falls short you fix it with a heavier grade or lamination, and both eat the saving.

Related Articles

Working on kraft tags and unsure whether the GSM is enough, or how far the brand colour will drift on brown stock? Send the size, GSM and colour reference and we will proof on the same paper batch with colour data attached.

Request a kraft tag proof →