An acrylic (PMMA) hang tag is a 2–5 mm clear or frosted panel, laser cut to shape and printed on a UV flatbed. Streetwear and premium outdoor brands use it because it does not soften in the rain, it has weight in the hand, and it does not curl on the rail the way paper does after two weeks.

1. Acrylic versus paper, metal and rPET

Material Typical thickness Print method Best for
Coated paper 350–450 g/m² Offset plus foil Volume, short lead time
Acrylic 2–3 mm UV flatbed plus white Streetwear, capsules, wet climates
Stainless steel 0.5–0.8 mm Etching or laser Premium, long-life
Recycled PET 0.6–1.0 mm Screen printing Recycled story, light weight

2. Thickness and size: three numbers that decide the result

A 40 × 80 mm panel works at 2 mm and weighs about 8 g. 50 × 100 mm needs 3 mm. Panels of 60 × 120 mm and above need 5 mm and should be fixed with a rivet rather than a cord. Below 2 mm the panel flexes and the UV ink cracks at the hole first.

Use a 4 mm hole with at least 8 mm from the hole centre to the edge. Too close to the edge and the laser heat-affected zone chips the panel; too small and a 1.5 mm cotton cord will not pass. Putting both numbers in the artwork is cheaper than arguing about them later.

3. Printing: white ink first, then colour

Printing CMYK straight onto clear acrylic lets the background show through and the colour goes grey. The correct UV flatbed sequence is one or two white passes first, then CMYK. Frosted panels can skip the white, but the colour will read more saturated than the artwork.

Match Pantone on a 3 mm clear sample and accept ΔE of 2 or less. Without a white base the colour shifts with whatever is behind the panel; that is physics, not a printer cutting corners.

4. Attachment: cord, rivet or metal eyelet

A 1,5 mm waxed cotton cord through a 4 mm hole is the default. A 5 mm panel should use a 6 mm metal eyelet so a worn hole does not become a sharp edge; rivets are for permanent fixing. Watch the weight too: a 5 mm tag will distort thin chiffon.

5. Compliance: material, ink and packaging

PMMA and UV inks must meet the heavy-metal and phthalate limits of REACH (EC) 1907/2006. Shipping into the EU also requires a responsible person and traceable information under GPSR (EU) 2023/988, and the packaging itself falls under PPWR (EU) 2025/40. Origin marking is the importer's duty; a brand name alone does not satisfy it.

Childrenswear adds another line: if a detachable small part fits a under-three test cylinder, the design fails outright, however good the printing. Confirm panel size and whether the attachment detaches before you quote a kids tag.

6. Cost, MOQ and lead time

Trim orders start at 3000–5000 pieces per design. An acrylic tag needs no tooling, and price is driven by three things: panel thickness times area, the number of print passes (white counts as one), and edge polishing. Sampling runs 5–7 days, bulk 12–18 days; the quote follows the artwork and the quantity.

Prove the proportion and hole position on a paper mock-up first. Changing paper takes a day; changing acrylic takes a month.

Related Articles

Send the artwork and target market; we will return an order-ready spec covering thickness, white ink, hole position and attachment.

Request an acrylic tag sample