A third-party logistics warehouse does four things with your packaging: goods-in, putaway, pick and pack, dispatch. Every step is timed and every deviation becomes a chargeback or a late dispatch. A written packaging spec is the cheapest way to keep those four steps predictable.

1. What the 3PL does with your packaging

Map the four touchpoints before writing a single line. Most disputes trace back to a spec that describes the product beautifully and the parcel not at all.

Step What the spec must state Typical value
Goods-in Carton label and unit limits GS1-128 SSCC; ≤ 20 kg per carton, ≤ 60 × 40 × 40 cm
Putaway Barcode scannable on or through the bag, hook tucked in Barcode readable through the film
Pick and pack Film thickness, seal type, headroom 40–60 μm, 3-side seal, 20–30 mm headroom
Dispatch Label size, carrier size band 100 × 150 mm label, parcel inside the carrier band

2. Poly bag: film thickness, size and venting

Film thickness is where cost and protection meet. 40 μm (0.04 mm) is the floor for a folded knit; outerwear and anything with metal hardware usually needs 50–60 μm, because hardware corners punch through thin film in transit.

Size comes from the folded measurements plus 20–30 mm of headroom on the open side, not from the hanger size. A bag that is too tight tears at the seal; one that is too loose looks empty to the picker. Both slow the line.

  • Down and technical styles: a 6 mm vent hole every 100 mm prevents ballooning in air freight and musty odour
  • Childrenswear: bags with an opening of 5 in (127 mm) or more need a suffocation warning under US 16 CFR 1500.19
  • Returns: an opaque or frosted bag hides the fact that the parcel was already opened
  • No staples: a metal detector flags the whole bag as foreign matter

3. Barcode and label placement

A barcode printed over a seam, a curve or a glossy patch will fail the scanner and become a manual key-in. A 50 mm quiet zone, 100% magnification and the largest flat panel solve more problems than a better scanner.

On Amazon FBA the unit label is the FNSKU, not your own EAN, and it must cover the manufacturer barcode. Retail distribution centres want GS1-128 with an SSCC on the carton and EAN-13 on the unit. Never put both sets on the same face.

4. Insert cards, size stickers and tissue

An insert card does three jobs: it carries composition and care information that will not fit the sewn label, it explains the return process, and it carries the brand. 90 × 50 mm on 350 g/m² uncoated stock is the standard weight — it folds without cracking and stays thin enough to seal.

Put the size sticker on the folded garment, not on the bag, so it stays visible once the bag is opened, and use removable adhesive to avoid residue on the fabric. Tissue should be 17 g/m²; heavier paper turns the parcel into a pillow and pushes up freight cost.

5. The compliance duties a 3PL cannot check

A warehouse moves boxes; it does not audit your labels. Three duties stay with the brand. GPSR (EU) 2023/988 requires a responsible person inside the EU and traceable product information. PPWR (EU) 2025/40 sets recyclability and empty-space rules for packaging. On top of that, each member state EPR scheme — France AGEC registration, for example — needs a producer ID before the first parcel ships.

Japan and Korea work the same way. Japan Household Goods Quality Labelling Act requires composition and care marking in Japanese, and the packaging recycling law puts the packaging fee on the brand. Korea Electrical Appliances and Consumer Products Safety Control Act requires Korean-language marking, country of origin and warnings on household goods. None of this is on a warehouse checklist.

One market, one line. Put the EU, Japanese and Korean requirements in the same row and nobody checks any of them.

6. Pre-launch checklist

  • Film ≥ 40 μm for knits and ≥ 50 μm for outerwear, with the actual value written into the spec
  • Have the 3PL scan the barcode on its own scanner and sign it off
  • Insert carries the return address, service email and local language
  • EPR producer ID and GPSR EU responsible person are on file
  • Cartons ≤ 20 kg inside the carrier size bands, with the ASN template and carton label format agreed with the warehouse

Related Articles

Send your folded dimensions, film thickness and target markets; we will come back with a packaging spec draft you can hand straight to the warehouse.

Ask for a packaging spec template